| Last Modified: 11-29-2007 | 1.6 G | |
| Service Category: Suspension | Section: Suspension Control System | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000003F5I000X |
| Title: SUSPENSION CONTROL: ABSORBER CONTROL ACTUATOR: INSPECTION (2008 Sequoia) | ||
INSPECTION
1. INSPECT ABSORBER CONTROL ACTUATOR
(a) Inspect the absorber control actuator LH.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester Connection |
Sensor Condition |
Specified Condition |
|---|---|---|
|
1 (FAL+) - 2 (FAL-) |
Always |
6.4 to 7.2 Ω |
|
3 (FBL-) - 4 (FBL+) |
Always |
6.4 to 7.2 Ω |
|
(c) Inspect the absorber control actuator RH. |
(d) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester Connection |
Sensor Condition |
Specified Condition |
|---|---|---|
|
1 (FAR+) - 2 (FAR-) |
Always |
6.4 to 7.2 Ω |
|
3 (FBR-) - 4 (FBLR+) |
Always |
6.4 to 7.2 Ω |
|
|